Ordering data
| Product type description | BN 20-11RZ-M16 |
| Article number (order number) | 101165310 |
| EAN (European Article Number) | 4030661208909 |
| eCl@ss number, version 12.0 | 27-27-43-02 |
| eCl@ss number, version 11.0 | 27-27-01-05 |
| eCl@ss number, version 9.0 | 27-27-01-05 |
| ETIM number, version 7.0 | EC002544 |
| ETIM number, version 6.0 | EC002544 |
Approvals - Standards
| Certificates | cULus |
General data
| Standards | EN IEC 60947-5-1 |
| Working principle | Magnetic drive |
| Housing construction form | rectangular |
| Housing material | Aluminium |
| Active area | Metal film |
| Gross weight | 300 g |
General data - Features
| bias magnet | Yes |
| Number of snap-in contacts | 2 |
Mechanical data
| Actuating panels | lateral |
| Active area | lateral |
| Actuating element | Magnet |
| Mechanical life, minimum | 1,000,000,000 Operations |
| Actuating speed, maximum | 18 m/s |
Mechanical data - Switching distances according EN IEC 60947-5-3
| Switching distance Sn | 5 mm … 50 mm BP 10S = 5 mm 2 x BP 10S = 10 mm BP 20S = 15 mm BP 31S = 15 mm BP 11S = 5 mm 2 x BP 11S = 15 mm BP 12S = 10 mm BP 10N = 5 mm 2 x BP 10N = 10 mm BP 15N = 7 mm BP 15S = 7 mm 2 x BP 15/2N = 15 mm 2 x BP 15/2S = 15 mm BP 34N = 10 ... 25 mm BP 34S = 10 ... 25 mm BP 20N = 15 mm BP 31N = 15 mm BP 11N = 5 mm 2 x BP 11N = 15 mm BP 12N = 10 mm 2 x BP 12N = 5 ... 20 mm 2 x BP 12S = 5 ... 20 mm BP 21 N = 10 ... 35 mm BP 21 S = 10 ... 35 mm 2 x BP 21N = 15 ... 50 mm 2 x BP 21S = 15 ... 50 mm BE 20N = 10 mm BE 20S = 10 mm |
| Note (Switching distance Sn) | Actuating distance up to 50 mm depending on version and actuating magnet |
| Repeat accuracy R | 0.3 mm |
Mechanical data - Connection technique
| Termination | Screw terminals M20 x 1.5 |
Mechanical data - Dimensions
| Length of sensor | 47 mm |
| Width of sensor | 104 mm |
| Height of sensor | 52 mm |
Ambient conditions
| Degree of protection | IP67 |
| Ambient temperature | -25 ... +90 °C |
| Resistant to vibration | 50 g, on sine wave oscillation |
Electrical data
| Switching voltage, maximum | 250 VAC |
| Switching current, maximum | 3 A |
| Switching capacity, maximum | 120 W |
| Switching capacity, maximum | 120 VA |
| Switching element | Bistable contact, NC / NO |
| Bounce duration, minimum | 0.3 ms |
| Bounce duration, maximum | 0.6 ms |
| Maximum switching frequency | 1,080,000 /h |
Electrical data - Digital Output
| Design of control elements | Reed contacts |
Scope of delivery
| Scope of delivery | Actuator must be ordered separately. |
Accessory
| Recommendation (actuator) | BP 10 S 2x BP 10 S BP 15 S BP 34 S BP 20 S BP 31 S BP 11 S 2x BP 11 S BP 12 S BP 21 S 2x BP 21 S BE 20 S BP 10 N 2x BP 10 N BP 15 N 2 x BP 15/2 N 2x BP 15/2 S BP 34 N BP 20 N BP 31 N BP 11 N 2x BP 11 N BP 12 N 2x BP 12 N 2x BP 12 S BP 21 N 2x BP 21 N BE 20 N |
Note
| Note (General) | The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets. When the switches and actuators come together, the colours must coincide: Red (S) to red (S) and green (N) to green (N). |
